Recent Mold Remediation Posts

What A Mold Remediation Professional Will Do

1/7/2022 (Permalink)

Mold remediation companies will clean up your mold in a few days if just some washing and removing carpet is involved, or in a few weeks if demolition and rebuilding is required.

Generally, the cleanup process entails:

  • Removing water-damaged, mold-infested materials.
  • Cleaning and disinfecting walls, carpet, and personal items.
  • Removing drywall and studs if mold damage is extensive.
  • Vacuuming with HEPA (high-efficiency particulate air) filtration.

If mold infestation is severe and you are mold-sensitive, you may have to live elsewhere during cleanup.

Remediation costs vary depending on how much and where mold exists. Figure on:

  • $500 to $4,000 to remove mold from crawlspaces only.
  • $2,000 to $6,000 to remove mold from ducts, crawl spaces, walls, and attics.
  • $10,000 to $30,000 (or more) to repair widespread structural damage.

https://www.houselogic.com/organize-maintain/home-maintenance-tips/how-eliminate-mold-your-home/

SERVPRO of Grand Prairie  is here for all of your restoration needs.

What Damage Can Result from Mold Exposure?

1/6/2022 (Permalink)

If mold is allowed to grow and spread in a home or commercial building, a variety of physical damage can result -- to both the structure itself, and to the building's fixtures or contents.

Building Materials and Structural Components. Mold may cause serious structural damage to a building, because it feeds on and breaks down organic matter. Therefore, when mold infests walls, insulation, paper backing, or carpeting, the materials must be removed. Cleaning and removal causes great expense and inconvenience, but is often necessary.

Personal Property. In addition to causing structural damage, mold may destroy property within the home. When mold attaches to personal property it may be very difficult or impossible to clean. Often the item will have to be destroyed because the spores cannot be fully removed.

Heating and Ventilation Systems. Mold may also enter heating and ventilation systems. Many sections of the system may not be accessible for visible inspection or cleaning, therefore you may need professional assistance. It is very important that heating and ventilation systems are cleaned thoroughly, as spores may use the systems as gateways to other areas of the home or commercial building. If the system cannot be cleaned, or if a moisture problem cannot be corrected, the whole system may have to be removed and replaced, often at great expense.

In the end, the best way to alleviate a mold problem is to deal with its root cause -- almost always a water intrusion problem. If you watch for warning signs and correct a moisture problem soon after it occurs, you may be able to avoid substantial costs involved in cleaning a home or commercial building that has been infested with mold.

https://www.findlaw.com/injury/torts-and-personal-injuries/mold-warning-signs-and-damage.html

SERVPRO of Grand Prairie  is here for all of your restoration needs.

How to Deal with a Mold Problem

10/26/2021 (Permalink)

When it comes to dealing with mold, prevention is key, but preventing it isn’t always possible. 

Call in professionals. The minute you suspect mold in the workplace, call in specialists that can access your office building and find the source of the mold problem. Often mold appears indoors due to a leak, or through environmental factors such as flooding or high humidity.

Additionally, if you rent an office space, be sure to alert the landlord about the situation before you schedule a mold inspection. 

Ideal conditions for mold growth:

  • Temperatures above 70
  • High humidity
  • Water damage
  • Dampness

https://www.paradisoinsurance.com/business-insurance/how-deal-with-mold-in-the-workplace/

SERVPRO of Grand Prairie  is here 24 hours a day, 7 days a week, 365 days a year for all of your restoration needs.

Will a Running Water Fountain in Your House Add Humidity?

10/26/2021 (Permalink)

Keeping your home healthy and mold free requires monitoring indoor humidity levels and sources of moisture. Many factors contribute to rising indoor humidity levels and high indoor humidity is especially problematic in humid climates. Homeowners who wish to add a running water fountain to their home may find their humidity levels on the rise. However, those who live in dry climates may wish to place a fountain indoors to raise humidity.

Identification

Relative humidity is the ratio of the amount of water vapor present in the air to the greatest amount possible at the same temperature. When humidity is high, it causes people to sweat. Reducing indoor humidity levels is the key to keeping mold growth at bay and makes living areas more comfortable. Low humidity can make skin feel dry and itchy, irritate nasal passages and dry out wood furnishings.

https://www.ehow.com/info_11403006_running-water-fountain-house-add-humidity.html

SERVPRO of Grand Prairie  is here for all of your restoration needs.

Use Bleach On Stains

9/1/2021 (Permalink)

Use Bleach on Stains

Mold (especially dark or brightly-colored mold) has a knack for staining grout and other porous surfaces. While bleach isn’t the best at actually killing mold, it’s hard to beat when it comes to stain removal. Using a spray bottle, apply a solution of one part bleach and one part water to soiled areas, let it sit for several minutes, spray the surfaces with bleach and water again, and then use a scrub brush to banish the discoloration.

Rinse thoroughly with regular hot water afterward. (Note: an old toothbrush, or a cheap new one from your local dollar store, works great for narrow, hard-to-reach areas. Just remember to throw the toothbrush away afterward!)

https://realtimelab.com/blog/how-to-prevent-black-mold-in-your-shower/

SERVPRO of  Grand Prairie is here 24 hours a day 7 days a week 354 days a year for all of your restoration needs.

Preventing Black Shower Mold

8/23/2021 (Permalink)

Stay Dry

Moisture in the air can encourage mold growth, which is why bathrooms are often prime real estate for the stuff. Do your best to keep your bathroom well-ventilated by running an exhaust fan during and for several minutes after each shower or bath, and leave the bathroom door open whenever you can. 

Launder towels, washcloths, and bathmats frequently, too. For added protection, you can even squeegee down tile and glass surfaces and towel-dry your sinks to remove excess water.

Use a Shower Curtain

Most adults know to draw the curtain every time they shower, but if you live with children, make sure that they know to do this, as well! These days, decorative fabric shower curtains are usually paired with a disposable plastic liner, which eliminates the need to replace the “pretty” curtain when it gets dirty. 

Regardless of your decorating tastes, make sure that the curtain (or at least the liner) is tucked into the bathtub properly (instead of draped over the tub) when the water’s running; doing so can do wonders for keeping water off of your floor. Moldy shower curtains can sometimes be laundered, but plastic liners that show signs of mold growth should be replaced completely.

https://realtimelab.com/blog/how-to-prevent-black-mold-in-your-shower/

SERVPRO of Grand Prairie  is here for all of your restoration needs.

Clean Visible Mold Immediately

8/19/2021 (Permalink)

Clean Visible Mold Immediately

Surface molds grow in just about any damp location, such as the grout lines of a ceramic tile shower. To get rid of mold, scrub with detergent and water and let the surface dry completely. Or use a solution of 10 percent bleach and 90 percent water (a stronger bleach solution will not give better results). Spray or brush on the solution, let it sit 10 minutes, then rinse it off and let dry

Use paint with mildewcide in damp areas

Mildewcide in paint is usually effective for controlling surface mold in damp rooms like bathrooms and outside in shady areas. Many paints already have mildewcide in them. Check with your paint dealer to be sure.

https://www.familyhandyman.com/article/10-tips-for-dealing-with-water-damage-mold-and-mildew/

SERVPRO of Grand Prairie is here for all of your restoration needs

Actions that will help to reduce humidity

8/16/2021 (Permalink)

Actions that will help to reduce humidity

  • Vent appliances that produce moisture, such as clothes dryers, stoves, and kerosene heaters to the outside where possible. (Combustion appliances such as stoves and kerosene heaters produce water vapor and will increase the humidity unless vented to the outside.)
  • Use air conditioners and/or de-humidifiers when needed.
  • Run the bathroom fan or open the window when showering. Use exhaust fans or open windows whenever cooking, running the dishwasher or dishwashing, etc.

Actions that will help prevent condensation:

  • Reduce the humidity (see preceding page)
  • Increase ventilation or air movement by opening doors and/or windows, when practical. Use fans as needed.
  • Cover cold surfaces, such as cold water pipes, with insulation.
  • Increase air temperature.

https://www.epa.gov/mold/brief-guide-mold-moisture-and-your-home

SERVPRO of Grand Prairie is here 24 hours a day 7 days a week 365 days a year for all of your restoration needs

Where does Mold come from

8/4/2021 (Permalink)

Where Does Mold Come From?

Even the cleanest home can harbor mold. According to the Centers for Disease Control and Prevention (CDC), mold typically enters your home the same way you do – through the door. Mold spores are easily tracked in on your clothes and shoes. Mold can also get in through windows or the air conditioning/heating system.

Once mold spores infiltrate your home, they can quickly grow in humid places. That’s why you see most mold and mildew in the bathroom. Being that closets are typically small, dark spaces, they make excellent breeding grounds for mold. Additionally, cardboard, wood, fabric, carpet, and drywall all provide the needed nutrients for mold to flourish – and all are commonly found inside of your closets.

https://www.creativeclosetorganizers.com/how-to-hinder-mold-growth-in-closets

SERVPRO of Grand Prairie  is here for all of your restoration needs.

Tips and techniques

8/3/2021 (Permalink)

The tips and techniques presented in this section will help you clean up your mold problem. Professional cleaners or remediators may use methods not covered in this publication. Please note that mold may cause staining and cosmetic damage. It may not be possible to clean an item so that its original appearance is restored.

  • Fix plumbing leaks and other water problems as soon as possible. Dry all items completely.
  • Scrub mold off hard surfaces with detergent and water, and dry completely.
  • Absorbent or porous materials, such as ceiling tiles and carpet, may have to be thrown away if they become moldy. Mold can grow on or fill in the empty spaces and crevices of porous materials, so the mold may be difficult or impossible to remove completely.
  • Avoid exposing yourself or others to mold (see discussions: What to Wear When Cleaning Moldy Areas and Hidden Mold).
  • Do not paint or caulk moldy surfaces. Clean up the mold and dry the surfaces before painting. Paint applied over moldy surfaces is likely to peel.
  • If you are unsure about how to clean an item, or if the item is expensive or of sentimental value, you may wish to consult a specialist. Specialists in furniture repair, restoration, painting, art restoration and conservation, carpet and rug cleaning, water damage, and fire or water restoration are commonly listed in phone books. Be sure to ask for and check references. Look for specialists who are affiliated with professional organizations.

https://www.epa.gov/mold/brief-guide-mold-moisture-and-your-home

SERVPRO of Grand Prairie  is here for all of your restoration needs.

Monitor Humidity Indoors

1/14/2021 (Permalink)

Monitor Humidity Indoors

The EPA recommends keeping indoor humidity between 30 and 60 percent. You can measure humidity with a moisture meter purchased from your local hardware store. You'll also be able to detect high humidity by simply paying attention to potential problem areas in your home. Telltale signs of excessive humidity include condensation on windows, pipes, and walls. If you notice condensation, dry the surface immediately and address the source of moisture (for example, turn off a humidifier if water appears on the inside of nearby windows).

Direct water away from your home

If the ground around your home isn't sufficiently sloped away from the foundation, water may collect there and seep into your crawlspace or basement.

https://www.treehugger.com/how-to-prevent-mold-tips-4864317

SERVPRO of Grand Prairie  is here for all of your restoration needs.

Prevent Moisture with Proper Ventilation

1/13/2021 (Permalink)

Prevent Moisture with Proper Ventilation

It may be that your routine domestic activities are encouraging the growth of mold in your home. Make sure an activity as simple as cooking dinner, taking a shower, or doing a load of laundry doesn't invite mold by providing proper ventilation in your bathroom, kitchen, laundry room, and any other high-moisture area. Vent appliances that produce moisture — clothes dryers, stoves — to the outside (not the attic). Use AC units and dehumidifiers (especially in humid climates), but make sure they don’t produce moisture themselves by checking them periodically and cleaning them as directed by the manufacturer. Your energy-efficient home may be holding moisture inside, so open a window when cooking or washing dishes or showering, or run an exhaust fan.

https://www.treehugger.com/how-to-prevent-mold-tips-4864317

SERVPRO of Grand Prairie  is here for all of your restoration needs.

Places to look for mold

1/5/2021 (Permalink)

Places to look for mold

Under the Sink

A slow drip from a water line or the drain line beneath a kitchen or bathroom sink will often go unnoticed until a musty smell alerts you that something’s not right. Because the area under a sink is dark, it’s a prime place for mold to develop when moisture is present. It’s a good idea to check regularly under sinks with a flashlight to ensure that a slow drip isn’t causing mold to grow.

Behind a Bathtub Surround

Unless your bathtub is a single, molded unit, there a good chance the caulk between the tub and the surround will one day fail, allowing water to leak in and damage the wood studs and framing materials. Keep an eye on the condition of the caulk, and if it’s starting to yellow or pull away, remove it and replace it with fresh new caulk.

https://www.bobvila.com/slideshow/15-places-water-damage-may-be-hiding-in-your-home-52971.

SERVPRO of Grand Prairie  is here for all of your restoration needs.

Actions that will help to reduce humidity

10/16/2020 (Permalink)

Actions that will help to reduce humidity

  • Vent appliances that produce moisture, such as clothes dryers, stoves, and kerosene heaters to the outside where possible. (Combustion appliances such as stoves and kerosene heaters produce water vapor and will increase the humidity unless vented to the outside.)
  • Use air conditioners and/or de-humidifiers when needed.
  • Run the bathroom fan or open the window when showering. Use exhaust fans or open windows whenever cooking, running the dishwasher or dishwashing, etc.

Actions that will help prevent condensation:

  • Reduce the humidity (see preceeding page)
  • Increase ventilation or air movement by opening doors and/or windows, when practical. Use fans as needed.
  • Cover cold surfaces, such as cold water pipes, with insulation.
  • Increase air temperature.

https://www.epa.gov/mold/brief-guide-mold-moisture-and-your-home

SERVPRO of Grand Prairie is here for all of your restoration needs.

Mold Food Sources and Cleaning to Prevent Mold

10/2/2020 (Permalink)

Mold Food Sources and Cleaning to Prevent Mold

Mold grows and feeds on organic substances such as wood or cotton. Mold should not grow on surfaces like plastic, metal or glass unless there is a layer of grease or some other organic substance which it can feed on.

Some materials mold commonly grows on in the home include wood, carpet, food, paper, insulation, wallpaper, paint, wallpaper glue, plasterboard, fabrics, cotton, books, leather, chipboard, furniture, dust, ceiling tiles, inside air conditioners and almost any other organic material.

You should clean regularly to reduce dirt and grime which mold can live on. Dust and vacuum often, ideally with a HEPA (High Efficiency Particulate Air) filtered vacuum cleaner to remove dust and other substances that mold can grow off of. It has been found that 80% of mold grows on dust.

https://moldpedia.com/how-to-prevent-mold

SERVPRO of Grand Prairie is here for all of your restoration needs.

How to Prevent Mold

9/1/2020 (Permalink)

How to Prevent Mold

The main things mold needs to grow in a home are organic materials to feed on and moisture. In houses there are always plenty of organic materials for mold to live on such as wood, drywall and various other building materials.

Moisture, on the other hand, can be controlled practically and so keeping the moisture in your home low is the best way to prevent mold growth.

Prevent Mold by Preventing Moisture

Most molds need 24-48 hours of moisture to begin to grow. Therefore, if a suitable material in your home is wet for more than 24 hours then you run the risk of mold starting to grow.

Prevent Mold by Preventing Water Leaks

There are a few main things which usually cause moisture problems in the home. One is water leaks. These include things such as leaking roofs or walls, leaking pipes and leaking taps or a leaking shower.

If you know of any leaks in your home you should fix them without delay. You might need to inspect your home to find any water leaks you didn't know about.

https://moldpedia.com/how-to-prevent-mold

SERVPRO of Grand Prairie is here for all of your restoration needs.

Conditions for Mold Growth in Houses

8/17/2020 (Permalink)

Conditions for Mold Growth in Houses

Besides oxygen and organic materials containing carbon to provide nutrients, the other main requirement mold needs to grow is moisture. You can find mold growing almost anywhere provided there is enough of a moisture source for it. Causes of Mold has more information about what causes mold in the home.

Mold problems cannot develop in houses unless there is a moisture problem. The moisture accumulation might be caused through humidity, condensation, or water intrusion from leaks, spills, floods, etc. Most molds only require suitable materials to be wet for 24-48 hours before they can grow.

Molds that can survive using only humidity as their moisture source are called Xerophilic, whereas other molds require an accumulation of moisture to grow. Indoors the best way to prevent mold growing is to limit moisture.

https://moldpedia.com/

SERVPRO of Grand Prairie is here for all of your restoration needs.

Leaking Pipes Cause Mold

8/17/2020 (Permalink)

Leaking Pipes Cause Mold

Water leaks from pipes are a common cause of mold growth. The worst leaks are the ones that go undetected because they are hidden out of view, like inside a wall. By the time you discover these leaks mold has usually started to grow already.

Leaks in Roof Cause Mold

Like some leaking pipes, a roof that leaks into the attic might not be discovered until it's already lead to mold growth.

The best thing to do is to check the attic regularly for leaks and keep an eye on the ceiling below the attic. If you notice any signs of water damage on the ceiling or any mold that has grown through then you probably have a leaking roof.

Condensation Causes Mold

Cold surfaces can create condensation in your home. Condensation collects on cold metal pipes as well as on cold concrete floors, even if there is carpet over the top, and on walls. Places like these where condensation occurs are prime spots for mold growth.

https://moldpedia.com/what-causes-mold-grow

SERVPRO of Grand Prairie is here for all of your restoration needs.

You visibly see mold spores.

8/10/2020 (Permalink)

You visibly see mold spores.

If it's visible, it could be worse than it looks. Of course, one of the most obvious ways to determine that you have mold in your house is if you can see it. The downside? If you see a ton of visible mold, it can be an indicator that you have a big problem on your hands.

"Once you see it, you've got a big mold problem because what you're seeing is literally just the tip of the iceberg," Kelly Hayes-Raitt, a house sitter and the former director of the HomeSafe Campaign in California, told INSIDER.

Simply scrubbing the visible mold with soap and a sponge won't actually get rid of the mold. So, if you see visible mold, you need to reach out to a mold remediation company or another expert to help you get things under control, including any leaks that may have caused the issue in the first place. 

https://www.insider.com/is-there-mold-in-my-house-2018-12#you-visibly-see-mold-spores-1

 SERVPRO of Grand Prairie is here for all of your restoration needs.

What does mold look like

8/10/2020 (Permalink)

What does mold look like

Mold is everywhere. It’s a type of fungus that grows from tiny spores that float in the air. It can grow almost anywhere that spores land and find moisture and a comfortable temperature, between 40- and 100-degrees F. Typically that includes about every damp place in your home.

You can easily spot the most visible type of mold, called mildew, which begins as tiny, usually black spots but often grows into larger colonies. It’s one of the easier ways of how to tell if you have mold. It’s the black stuff you see in the grout lines in your shower, on damp walls, and outdoors on the surfaces of deck boards and painted siding, especially in damp and shady areas. A mildewed surface is often difficult to distinguish from a dirty one. To test for mold and mildew and how to tell if your house has mold, simply dab a few drops of household bleach on the blackened area. If it lightens after one to two minutes, you have mildew. If the area remains dark, you probably have dirt.

https://www.familyhandyman.com/cleaning/mold-and-mildew/how-to-test-for-mold/

 SERVPRO of Grand Prairie is here for all of your restoration needs.

How do molds get in the indoor environment and how do they grow?

8/10/2020 (Permalink)

How do molds get in the indoor environment and how do they grow?

Mold is found both indoors and outdoors. Mold can enter your home through open doorways, windows, vents, and heating and air conditioning systems. Mold in the air outside can also attach itself to clothing, shoes, and pets can and be carried indoors. When mold spores drop on places where there is excessive moisture, such as where leakage may have occurred in roofs, pipes, walls, plant pots, or where there has been flooding, they will grow. Many building materials provide suitable nutrients that encourage mold to grow. Wet cellulose materials, including paper and paper products, cardboard, ceiling tiles, wood, and wood products, are particularly conducive for the growth of some molds. Other materials such as dust, paints, wallpaper, insulation materials, drywall, carpet, fabric, and upholstery, commonly support mold growth.

https://www.cdc.gov/mold/faqs.htm

 SERVPRO of Grand Prairie is here for all of your restoration needs.

Look for the Cause

1/29/2020 (Permalink)

If your building is experiencing water penetration, consistent moisture or leaks, demand that the landlord investigates the cause and promptly provide you with an action plan. If the landlord does not act, put it on notice that you intend to act and that you will hold it responsible for the costs. Give notice to your insurer. Do the same if you are the building owner.

Call in professionals to make an assessment. To stop further mold growth, the landlord or you must investigate and fix the source of the water or moisture. Ask for the help of contractors, the building designer and environmental experts to assess, identify and repair the source. A number of companies investigate mold and will come up with action plans to address it. Responding to mold involves more than just determining and fixing the source of the water. Often several experts must be retained, including experts in toxicology and epidemiology. Expert testing may cost thousands of dollars. If mold is found in large enough concentrations, the building must be cleaned and remediated to ensure the safety of the occupants before they return. Once the problem is fixed, ask the expert to certify that the building is "clean," or demand such a certification from the landlord.

https://www.ehstoday.com/industrial-hygiene/article/21906241/toxic-mold-what-every-employer-should-know

SERVPRO of Grand Prairie is here for all of your restoration needs.

What can you do to cover your losses?

1/29/2020 (Permalink)

  • Follow-up with your insurer - Stay involved with your insurer once notice has been given. Even before a lawsuit has been filed, your insurer may hire experts and legal counsel to address the mold claims. You should stay involved with these people, because you likely have knowledge that the insurer, experts or counsel may not have. Ask for regular updates on the status of the claims, and, if possible, accompany counsel and experts to the building when testing or other observations are made, and take notes of the condition yourself. Make sure that you are familiar with the background of the experts retained by the insurance company. If you do not feel that the experts are handling the matter appropriately, demand that the insurer replace them.
  • Review your construction contracts and leases - If you are constructing a building, renovating your space or adding to a building, review your construction contracts to make sure that contractors or subcontractors are liable for any construction defects, including defects that may cause mold growth. Review your leases. If you are a landlord, make sure your tenant has obtained the appropriate type and amount of insurance, and ask the tenant to name you as an additional named insured, if possible. Also, make sure that your tenant has agreed to indemnify you for any claims resulting from mold. If you are a tenant, make sure that your landlord is responsible for water damage caused by acts other than your acts to your leased premises, and any mold related damage as a result, including relocation costs. Obtain an indemnity provision from your landlord.

https://www.ehstoday.com/industrial-hygiene/article/21906241/toxic-mold-what-every-employer-should-know

SERVPRO of Grand Prairie is here for all of your restoration needs.

Choose the right Company

1/29/2020 (Permalink)

If you are going to hire a professional mold remediation company, make sure you get a few estimates and choose a company that you believe will do a thorough job. Be sure to check with your local Better Business Bureau or Health Department to make sure the company has a good reputation. Ask for recent references. Ask the mold tester if they are familiar with them.  After the mold in your home has been removed, have the tester come back and air-test for mold. They will be able to tell you if the levels of mold are acceptable. Remember it is impossible to remove all of the mold. The goal is to try to get the levels inside your home the same as outside your home. Be proactive in the future about mold prevention.

https://www.mold-advisor.com/mold-in-your-home.html

SERVPRO of Grand Prairie is here for all of your restoration needs.

Specific recommendations for decreasing mold exposure

10/11/2019 (Permalink)

  • Keep humidity levels as low as you can—no higher than 50%–all day long. An air conditioner or dehumidifier will help you keep the level low. Bear in mind that humidity levels change over the course of a day with changes in the moisture in the air and the air temperature, so you will need to check the humidity levels more than once a day.
  • Use an air conditioner or a dehumidifier during humid months.
  • Be sure the home has adequate ventilation, including exhaust fans.
  • Add mold inhibitors to paints before application.
  • Clean bathrooms with mold killing products.
  • Do not carpet bathrooms and basements.
  • Remove or replace previously soaked carpets and upholstery.

What areas have high mold exposure?

  • Antique shops
  • Greenhouses
  • Saunas
  • Farms
  • Mills
  • Construction areas
  • Flower shops
  • Summer cottages

A qualified environmental lab took samples of the mold in my home and gave me the results. Can CDC interpret these results?

Standards for judging what is an acceptable, tolerable, or normal quantity of mold have not been established. If you do decide to pay for environmental sampling for molds, before the work starts, you should ask the consultants who will do the work to establish criteria for interpreting the test results. They should tell you in advance what they will do or what recommendations they will make based on the sampling results. The results of samples taken in your unique situation cannot be interpreted without physical inspection of the contaminated area or without considering the building’s characteristics and the factors that led to the present condition.

 https://www.cdc.gov/mold/faqs.htm#indoor

SERVPRO of Grand Prairie is here for all of your restoration needs.

Mold and Your Home

10/11/2019 (Permalink)

Mold is found both indoors and outdoors. Mold can enter your home through open doorways, windows, vents, and heating and air conditioning systems. Mold in the air outside can also attach itself to clothing, shoes, bags, and pets can and be carried indoors.

Mold will grow in places with a lot of moisture, such as around leaks in roofs, windows, or pipes, or where there has been flooding. Mold grows well on paper products, cardboard, ceiling tiles, and wood products. Mold can also grow in dust, paints, wallpaper, insulation, drywall, carpet, fabric, and upholstery.

You Can Control Mold

Inside your home you can control mold growth by:

  • Controlling humidity levels;
  • Promptly fixing leaky roofs, windows, and pipes;
  • Thoroughly cleaning and drying after flooding;
  • Ventilating shower, laundry, and cooking areas.

If mold is growing in your home, you need to clean up the mold and fix the moisture problem. Mold growth can be removed from hard surfaces with commercial products, soap and water, or a bleach solution of no more than 1 cup of household laundry bleach in 1 gallon of water.

Mold growth, which often looks like spots, can be many different colors, and can smell musty. If you can see or smell mold, a health risk may be present. You do not need to know the type of mold growing in your home, and CDC does not recommend or perform routine sampling for molds. No matter what type of mold is present, you should remove it. Since the effect of mold on people can vary greatly, either because of the amount or type of mold, you cannot rely on sampling and culturing to know your health risk. Also, good sampling for mold can be expensive, and standards for judging what is and what is not an acceptable quantity of mold have not been set. The best practice is to remove the mold and work to prevent future growth.

https://www.cdc.gov/mold/dampness_facts.htm

SERVPRO of Grand Prairie is here for all of your restoration needs.

Hidden signs your house could have mold

9/18/2019 (Permalink)

Your bathroom exhaust fan is on the fritz

“Mold is a particularly common problem in bathrooms with inadequate ventilation”

A bathroom exhaust fan is an essential tool to keep toxic mold at bay—but it won’t work if it’s clogged or not running well. In fact, if it’s still steamy five to ten minutes after you get out of the shower, your fan isn’t circulating enough air. It may need to be cleaned or replaced with a unit that meets the square footage of your bathroom. Piotraut also suggests cleaning the walls regularly with a bleach solution or other mold-killing product.

Do your floors feel squishy?

You know to be concerned about a soft spot in your hardwood floor. If you can access the subfloor through a crawl space or a basement, check for moisture. If that’s not possible, you’ll have to pull up a section of flooring. It’s worth it: That moisture—and any mold growth— will eventually spread. “If the wood floor is rotted, then the whole flooring needs to be changed,” says Piotraut. “If the flooring is still in good condition and only has a small amount of mold, it can be removed with mold remover.”

https://www.rd.com/health/wellness/hidden-signs-of-toxic-mold/

SERVPRO of Grand Prairie is here for all of your remediation needs.

mold

8/7/2019 (Permalink)

Why is mold growing in my home? Molds are part of the natural environment. Outdoors, molds play a part in nature by breaking down dead organic matter such as fallen leaves and dead trees, but indoors, mold growth should be avoided. Molds reproduce by means of tiny spores; the spores are invisible to the naked eye and float through outdoor and indoor air. Mold may begin growing indoors when mold spores land on surfaces that are wet. There are many types of mold, and none of them will grow without water or moisture. Molds are usually not a problem indoors, unless mold spores land on a wet or damp spot and begin growing. Molds have the potential to cause health problems. Molds produce allergens (substances that can cause allergic reactions), irritants, and in some cases, potentially toxic substances (mycotoxins). In addition, mold exposure can irritate the eyes, skin, nose, throat, and lungs of both mold- allergic and non-allergic people. Symptoms other than the allergic and irritant types are not commonly reported as a result of inhaling mold.

https://www.epa.gov/sites/production/files/2016-10/documents/moldguide12.pdf

 SERVPRO of Grand Prairie is here for all of your restoration needs.

Facts about Mold and Dampness

8/6/2019 (Permalink)

There is always some mold everywhere – in the air and on many surfaces. Molds have been on the Earth for millions of years. Mold grows where there is moisture. Mold is found both indoors and outdoors. Mold can enter your home through open doorways, windows, vents, and heating and air conditioning systems. Mold in the air outside can also attach itself to clothing, shoes, bags, and pets can and be carried indoors.

Mold will grow in places with a lot of moisture, such as around leaks in roofs, windows, or pipes, or where there has been flooding. Mold grows well on paper products, cardboard, ceiling tiles, and wood products. Mold can also grow in dust, paints, wallpaper, insulation, drywall, carpet, fabric, and upholstery.

You Can Control Mold

Inside your home you can control mold growth by:

  • Controlling humidity levels;
  • Promptly fixing leaky roofs, windows, and pipes;
  • Thoroughly cleaning and drying after flooding;
  • Ventilating shower, laundry, and cooking areas.

https://www.cdc.gov/mold/dampness_facts.htm

 SERVPRO of Grand Prairie is here for all of your restoration needs.

MOLD PREVENTION TIPS

8/6/2019 (Permalink)

  • Keep humidity levels as low as you can—no higher than 50%–all day long. An air conditioner or dehumidifier will help you keep the level low. Bear in mind that humidity levels change over the course of a day with changes in the moisture in the air and the air temperature, so you will need to check the humidity levels more than once a day.
  • Be sure your home has enough ventilation. Use exhaust fans which vent outside your home in the kitchen and bathroom. Make sure your clothes dryer vents outside your home.
  • Fix any leaks in your home’s roof, walls, or plumbing so mold does not have moisture to grow.
  • Clean up and dry out your home thoroughly and quickly (within 24–48 hours) after flooding.
  • Add mold inhibitors to paints before painting.
  • Clean bathrooms with mold-killing products.
  • Remove or replace carpets and upholstery that have been soaked and cannot be dried promptly. Consider not using carpet in rooms or areas like bathrooms or basements that may have a lot of moisture.

https://www.cdc.gov/mold/dampness_facts.htm

What is Mold?

8/5/2019 (Permalink)

Molds are a form of fungus. There are many different molds and they can be found both indoors and outdoors. Molds spread through the production of spores, which are present in all indoor environments and cannot be removed from them - spores are capable of surviving in harsh conditions that otherwise prevent the normal mold growth.

Molds grow best in moist, warm and humid environments - easily created in the home during the winter. When mold spores land on a damp spot they can begin to grow, digesting the material they are growing on as they do so. Molds are capable of growing on a variety of different surfaces, including fabric, paper and wood.

Common indoor molds include:

  • Alternaria - found in damp places indoors, such as showers or under leaky sinks
  • Aspergillus - often found indoors growing on dust, powdery food items and building materials, such as drywall
  • Cladosporium - capable of growing in cool areas as well as warm ones. It is typically found on fabrics and wood surfaces
  • Penicillium - typically found on materials that have been damaged by water and often has a blue or green appearance.

https://www.medicalnewstoday.com/articles/288651.php

SERVPRO of Grand Prairie is here for all of your restoration needs.

What to Do If Your House Has Mold (Or You Think It Does)

1/21/2019 (Permalink)

What to Do If Your House Has Mold (Or You Think It Does)

Mold. The very word can put terror into the eyes of a homeowner. 

So if you think you have mold, and plenty houses do – a 2003 University of Arizona study found that 100 percent of homes have mold (albeit not necessarily the dangerous kind) – what should you do?

Test for mold. That's probably the last thing you or any homeowner wants to hear because mold testing can be expensive, and there are plenty of horror stories out there.

 If you do have mold. Don't panic yet. This may not be a major problem. As noted, all homes have some mold.

Stay vigilant. If you aren't aware of any toxic mold in your home, keep an occasional eye out for it. "A lot of keeping mold away comes down to maintenance," Schoenberg says. "Anywhere you may have dampness, there can be mold. So look in dark and damp places. And it isn't always in obvious places. 

https://loans.usnews.com/what-to-do-if-your-house-has-mold-or-you-think-it-does

SERVPRO of Grand Prairie is here for all of your restoration needs.

A Few Mold Facts

10/31/2018 (Permalink)

What are molds?

Molds are fungi that can be found both indoors and outdoors. No one knows how many species of fungi exist but estimates range from tens of thousands to perhaps three hundred thousand or more. Molds grow best in warm, damp, and humid conditions, and spread and reproduce by making spores. Mold spores can survive harsh environmental conditions, such as dry conditions, that do not support normal mold growth.

 Top of Page

What are some of the common indoor molds?

  • Cladosporium
  • Penicillium
  • Alternaria
  • Aspergillus

Where are molds found?

Molds are found in virtually every environment and can be detected, both indoors and outdoors, year round. Mold growth is encouraged by warm and humid conditions. Outdoors they can be found in shady, damp areas or places where leaves or other vegetation is decomposing. Indoors they can be found where humidity levels are high, such as basements or showers.

What areas have high mold exposures?

  • Antique shops
  • Greenhouses
  • Saunas
  • Farms
  • Mills
  • Construction areas
  • Flower shops
  • Summer cottages

https://www.cdc.gov/mold/faqs.htm#where

SERVPRO of Grand Prairie is here for all of your restoration needs

Why does my home smell musty?

10/22/2018 (Permalink)

Why does my home smell musty?

If your home or clothing smells musty, chances are you have mold or mildew hiding out. While other things — like a lack of ventilation or high levels of humidity — can make a musty odor more noticeable, they typically are not the primary cause of the smell.

While the term “musty” often brings to mind an old library or your grandma’s attic, mold and mildew can grow practically anywhere—even your modern home or apartment. Essentially, all mold needs to grow is the presence of mold spores, a surface to grow on, warmth, darkness, oxygen, and moisture.

The last ingredient — moisture — is the biggest problem. When all of the other environmental elements combine with condensation, moisture from humidity, or leaking water, mold begins to grow. As mold forms, grows, and spreads, it emits gasses known as microbial volatile organic compounds (MVOCs). So that musty odor you are smelling is not “just” mold but is a result of the chemical compounds released at different stages of the mold’s growth.

https://molekule.com/blog/musty-smells-getting-rid-of-them-from-your-home-clothes/

SERVPRO of Grand Prairie is here for all of your restoration needs

Common Mold Types

9/25/2018 (Permalink)

Molds (also spelled “moulds”) are simple, microscopic organisms that can grow virtually anywhere, both inside buildings and outdoors. Mold colonies can grow inside damp or wet building structures. And mold spores are a common component of household and workplace dust.

Health effects from exposure to mold can vary greatly depending on the person and the amount and type of mold present.

Regardless of the type of mold, it should be treated as potentially a health hazard and should be removed from homes and workplaces.

Common Mold Types Found in Homes and Their Hazard Classes

Hazard Classes of Indoor Mold

In some countries indoor fungi have been grouped into 3 hazard classes based on associated health risk. These classes are similar to risk groups assigned to microorganisms handled in laboratory environments.

  • Hazard Class A: includes fungi or their metabolic products that are highly hazardous    to health. These fungi or metabolites should not be present in occupied dwellings. Presence of these fungi in occupied buildings requires immediate attention.
  • Hazard class B: includes those fungi which may cause allergic reactions to occupants if present indoors over a long period.
  • Hazard Class C: includes fungi not known to be a hazard to health. Growth of these fungi indoors, however, may cause economic damage and therefore should not be allowed.

Molds commonly found in kitchens and bathrooms

  • Cladosporium cladosporioides (hazard class B)
  • Cladosporium sphaerospermum (hazard class C)
  • Ulocladium botrytis (hazard class C)
  • Chaetomium globosum (hazard class C)
  • Aspergillus fumigatus (hazard class A)

Molds commonly found on wallpapers

  • Cladosporium sphaerospermum
  • Chaetomium spp., particularly Chaetomium globosum
  • Doratomyces spp (no information on hazard classification)
  • Fusarium spp (hazard class A)
  • Stachybotrys chartarum, commonly called ‘black mold‘ (hazard class A)
  • Trichoderma spp (hazard class B)
  • Scopulariopsis spp (hazard class B)

Molds commonly found on mattresses and carpets

  • Penicillium spp., especially Penicillium chrysogenum (hazard class B) and Penicillium aurantiogriseum (hazard class B)
  • Aspergillus versicolor (hazard class A)
  • Aureobasidium pullulans (hazard class B)
  • Aspergillus repens (no information on hazard classification)
  • Wallemia sebi (hazard class C)
  • Chaetomium spp., particularly Chaetomium globosum
  • Scopulariopsis spp.

Molds commonly found on window frames

  • Aureobasidium pullulans
  • Cladosporium sphaerospermum
  • Ulocladium spp.

Molds commonly found in basement (cellars)

  • Aspergillus versicolor
  • Aspergillus fumigatus
  • Fusarium spp.

Molds commonly found in flower pot soil

  • Aspergillus fumigatus
  • Aspergillus niger (hazard class A)
  • Aspergillus flavus (hazard class A)

https://www.moldbacteria.com/mold-types.html

SERVPRO of Grand Prairie is here 24/7 365, for all of your restoration needs

When you think you have mold?

8/22/2018 (Permalink)

What to Do If Your House Has Mold (Or You Think It Does)

If you do have mold. Don't panic yet. This may not be a major problem. As noted, all homes have some mold. If it's a small area, generally less than 10 square feet, and not that this is a recommendation, but you may be able to do it yourself or hire a handyman to come in and clean it. Websites from RemoveMoldGuide.com to Good Housekeeping articles explain the process, which basically entails treating areas of mold with a mixture of 1 part chlorine bleach and 15 parts water while wearing goggles and making sure you're in a well-ventilated room.

But you may need to hire the professionals. Lynn Munroe, who owns a public relations company in New City, New York, says that about 10 years ago, her youngest son, then 8 or 9 years old, had an unexplained stomach illness, and his asthma was getting worse. Munroe had taken him to numerous doctors, all of whom had no idea what was wrong.

It turned out the problem was with a dehumidifier in the basement. It was attached to the pipes behind the wall, to keep the basement dry. Unfortunately, the pipe apparently became disconnected from the drain pipe behind the wall, and for some time, had been dripping behind the wall.

"Next to where it was dripping was a cedar storage closet with my kids' old clothes that I was saving for my sister's kids," Munroe says. "I opened up that door one day and the inside of the closet was filled with black mold. The wall of that closet leaned up against my sons' playroom – and his TV where he spent countless hours with his brother playing video games. Air tests revealed a really bad mold problem not only in the closet but in the air."

 

Twenty-four hours later, Munroe says, "hazmat suits came and demolished my completely finished basement."

https://loans.usnews.com/what-to-do-if-your-house-has-mold-or-you-think-it-does

SERVPRO of Grand Prairie is here 24/7 365, for all of your restoration needs!

What to do if you smell or see mold in your home or business

8/9/2018 (Permalink)

What to do if you see or smell mold in your home

The most important step is to identify the source(s) of moisture, which result in mold growth, and make repairs to stop them. If you only clean up the mold and do not fix the moisture problem, most likely the mold growth will recur. If the source of the moisture is related to a building failure or fault, such as a burst pipe or leaking roof, a professional contractor should be consulted. In instances where the moisture source does not appear to be related to leaks, floods, structural faults or rising damp, it is most likely due to condensation. If you do not see mold growth but smell a musty odor, mold may be growing underneath or behind water-damaged materials, such as walls, carpeting, or wallpaper.

Once the source of the moisture has been identified and fixed, you need to decide if removing the mold from the affected areas is something that can be done without professional assistance. If the mold growth was caused by sewage back-up or other contaminated water, potential pathogens may be present and the work should be performed by a professional contractor that has experience in cleaning buildings damaged by contaminated water.

If the mold growth is due to condensation or small-scale leak and is limited to a small area (fewer than ten square feet), you can probably do the work yourself following guidelines such as those that have been prepared by the U.S. Environmental Protection Agency (EPA), Canada Mortgage and Housing Corporation and AIHA. On hard surfaces, such as countertops and furniture, use detergent and water to wash mold off and then dry completely. The use of biocides or chemical disinfectants is not recommended as these may be hazardous to occupants. Moldy porous or absorbent materials, such as ceiling tiles, wallboard and carpeting should be removed and replaced. People cleaning mold should wear rubber gloves, goggles and an approved respirator to protect against breathing airborne spores. An N95 respirator would be appropriate for most cleanup projects, provided that you are medically capable of wearing a respirator. If you have health concerns, you should consult your doctor before doing any mold cleanup.

Over the past decade or so, the industry has given rise to many individuals and companies who tout themselves as experts and certified in various aspects of mold investigation and remediation, but who may have little or no practical experience. If you choose to hire a consultants to help identify your problem, or a contractors to perform the cleanup in your home, make sure that they have specific work experience in dealing with and cleaning up mold, and check their references.

https://www.aiha.org/publications-and-resources/TopicsofInterest/Hazards/Pages/Facts-About-Mold.aspx

SERVPRO of Grand Prairie is here 24/7 365, for all of your restoration needs

Mold & Mildew

8/6/2018 (Permalink)

The Problem with mold mildew and molds are fungi - simple microscopic organisms that thrive anywhere there is a moist environment. Molds are a necessary part of the environment; without them, leaves would not decay and aspects of soil enrichment could not take place. It is their ability to destroy organic materials, however, that makes mold a problem for people - in our homes and in our bodies. Mildew (mold in early stage) and molds grow on wood products, ceiling tiles, cardboard, wallpaper, carpets, drywall, fabric, plants, foods, insulation, decaying leaves and other organic materials. Mold growths, or colonies, can start to grow on a damp surface within 24 to 48 hours. They reproduce by spores - tiny, lightweight “seeds”- that travel through the air. Molds digest organic material, eventually destroying the material they grow on, and then spread to destroy adjacent organic material. In addition to the damage molds can cause in your home, they can also cause mild to severe health problems. See the HEALTH section to check for possible moldrelated health problems. Mold in Your home? If your home has water damage due to - • flooding, • sewage back-up from flooding in the area, • plumbing or roof leaks, • damp basement or crawl space, • overflows from sinks or bathtub, or • high humidity: steam cooking, dryer vents, humidifiers, mildew and mold will develop within 24-48 hours of water exposure. Even worse, it will continue to grow until steps are taken to eliminate the source of moisture, and effectively deal with the mold problem.

https://www.fema.gov/pdf/rebuild/recover/fema_mold_brochure_english.pdf

SERVPRO of Grand Prairie is here 24/7 365 to serve you with all of your restoration needs.

Grand Prairie Residents: Follow These Mold Safety Tips If You Suspect Mold

4/2/2018 (Permalink)

Be careful! Without proper training, you could be spreading mold throughout your home.

If you see visible mold, do not disturb it. You can inadvertently spread the mold infestation throughout your home. When mold is disturbed, the mold can release microscopic mold spores which become airborne and can circulate inside your home.

What to Do:

  • Stay out of affected areas.
  • Turn off the HVAC system and fans.
  • Contact SERVPRO of Grand Prairie for mold remediation services.

What Not to Do:

  • Don’t touch or disturb the mold.
  • Don’t blow air across any surfaces with visible or suspected mold growth.
  • Don’t attempt to dry the area yourself.
  • Don’t spray bleach or other disinfectants on the mold.

About Our Mold Remediation Services

SERVPRO of Grand Prairie specializes in mold cleanup and restoration, in fact, it’s a cornerstone of our business.  Our crews are highly trained restoration professionals that use specialized equipment and techniques to properly remediate your mold problem quickly and safely.

If You See Signs of Mold, Call Us Today – (972)602-1112

Jesus Lives!

3/30/2018 (Permalink)

Jesus Lives

Close your eyes for a second and listen to the sounds around you, listen to the chirping of the birds, the cars driving around, the laughing of children. Now open them and look at the blue sky, look at the vibrancy of color around you, look at the child running around playing, watch life move at such a fast pace. It is because of a sacrifice a man made thousands of years ago that you are now able to do such things. It is because of the love he had for us that we live today. It is because of his mercy and grace that we can walk around enjoy the normalcy of life. Even with all the chaos that has been occurring throughout our country the love of Jesus shines through. Thank you Jesus for your love!

If you are in needing of emergency services after hours/ or during this holiday weekend SERVPRO Grand Prairie is here to help!

972-602-1112

If you see visible mold, do not disturb it. You can inadvertently spread the mold infestation throughout your home. When mold is disturbed, the mold can release microscopic mold spores which become airborne and can circulate inside your home.

What to Do:

  • Stay out of affected areas.
  • Turn off the HVAC system and fans.
  • Contact SERVPRO of Grand Prairie for mold remediation services.

What Not to Do:

  • Don’t touch or disturb the mold.
  • Don’t blow air across any surfaces with visible or suspected mold growth.
  • Don’t attempt to dry the area yourself.
  • Don’t spray bleach or other disinfectants on the mold.

About Our Mold Remediation Services

SERVPRO of Grand Prairie specializes in mold cleanup and restoration, in fact, it’s a cornerstone of our business.  Our crews are highly trained restoration professionals that use specialized equipment and techniques to properly remediate your mold problem quickly and safely.

If You See Signs of Mold, Call Us Today – 972-602-1112

Allergies? It might be a result of your Christmas Tree!!

12/12/2017 (Permalink)

Who would have thought that bringing in a real Christmas tree, enjoying the smell, the lights, and décor would cause an increase in your allergies. If you are suffering from the sniffles your REAL Christmas tree could be the cause. Here are the reasons why:

  • Even though it’s not visibly decaying, it is.
  • Christmas trees are coniferous softwoods and have a high moisture content.
  • Mold loves moisture.
  • The tree may take 6 years to grow before it’s cut.
  • In that period it can collect all sorts of mold, dust pollens and allergens.

SERVPRO Grand Prairie is certified through the State of Texas to perform Mold remediation services. Though it is highly unlikely that your homes structure be affected with mold spores due to your real Christmas tree a previous water damage or a constant leak could cause potential damage. If you are in need of mold remediation services we would be more than happy to assist you. Call SERVPRO Grand Prairie at 972-602-1112. 

Grand Prairie Residents- What to do if you suspect Mold!!

12/12/2017 (Permalink)

If you see visible mold, do not disturb it. You can inadvertently spread the mold infestation throughout your home. When mold is disturbed, the mold can release microscopic mold spores which become airborne and can circulate inside your home.

What to Do:

  • Stay out of affected areas.
  • Turn off the HVAC system and fans.
  • Contact SERVPRO Grand Prairie for mold remediation services.

What Not to Do:

  • Don’t touch or disturb the mold.
  • Don’t blow air across any surfaces with visible or suspected mold growth.
  • Don’t attempt to dry the area yourself.
  • Don’t spray bleach or other disinfectants on the mold.

About Our Mold Remediation Services

SERVPRO Grand Prairie specializes in mold cleanup and restoration, in fact, it’s a cornerstone of our business.  Our crews are highly trained restoration professionals that use specialized equipment and techniques to properly remediate your mold problem quickly and safely.

If You See Signs of Mold, Call Us Today – 972-602-1112

Signs of Mold? Call SERVPRO of Grand Prairie!

12/7/2017 (Permalink)

We are surrounded by mold spores unknowingly every day, but in the right conditions mold can quickly become a problem within our homes. Dealing with mold growth can be overwhelming and frustrating, especially because many people aren’t aware that they have a problem until it is excessive. Recognizing the signs of mold in your house and knowing how to prevent growth can save you time, energy, and money. 

First Signs of Mold - Trust Your Nose

Molds produce gases that have an earthy, musty odor. This odor is typically the first noticeable sign that there is a mold problem; however, for someone who has never encountered this smell it can be hard to identify. Many people compare the smell of mold to rotten wood or wet socks.

Typically, this odor is not one that will go away regardless of how many times you light candles, open windows, etc. People will often become “immune” to the smell of mold since they are living with it each day. If you suspect mold go outside for some fresh air before coming back into the house to try and identify any smells. Even if you are unsure that what you are smelling is mold pay attention to your nose. If your nose feels irritated, or if you are sneezing more often in a certain room, your body might be recognizing mold even if you are not.

Once you have recognized the smell of mold in your house, follow the scent until you find the point at which it is strongest. This is most likely the source of your problem. If you only notice the smell when your air conditioning turns on the growth could be occurring within your HVAC.

Visible Signs 

The first visible signs of mold may be just a few spots of discoloration on the wall or on the grout between tiles. While small spots like this may not seem too problematic, they show that the conditions in that area are perfect for mold growth and you may have a larger, unseen problem somewhere else.

There are many different types of household molds, and they can vary greatly in color. The most common colors of growths in houses are black, grey, and brown; however, mold can also be white, yellow, or even brighter colors such as blue or green. The only way to truly identify the species of mold in your house is for it to be tested by an industrial hygienist, color is not always indicative of the type of mold.

Mold can grow anywhere and on anything, as long as the conditions are conducive. If you see discolored spots in your home – on walls, floors, furniture, or even books - that are accompanied by other signs of mold, you might have a growth problem.

Certain Conditions Can Also Serve as Signs of Mold

The conditions that allow mold spores to thrive in a house can often serve as signs for growth that you might not be able to see or smell. In order to grow mold needs moisture. Knowing the history of your home, particularly pertaining to previous water damages, is vital when it comes to identifying the rooms in your home that may be displaying signs of mold. Some subtle symptoms of excessive moisture in your home that can lead to mold growth include:

  • Rust on pipes
  • Wallpaper or paint peeling
  • Warping wood
  • Condensation on walls or floors
  • A humidity level above 60% inside the home

At SERVPRO Grand Prairie our professionals have the training and equipment to remediate the mold in your home or business, if you suspect a water damage or mold growth don’t hesitate to call us for 24-hour emergency services at 972-602-1112

Do you suspect mold in your home?

8/18/2017 (Permalink)

Mold can spread very quickly, we are here to ensure that it does not become a health hazard.

Body:

Microscopic mold spores naturally occur almost everywhere, both outdoors and indoors. This makes it impossible to remove all mold from a home or business. Therefore, mold remediation reduces the mold spore count back to its natural or baseline level. Some restoration businesses advertise “mold removal” and even guarantee to remove all mold, which is a fallacy. Consider the following mold facts:

  • Mold is present almost everywhere, indoors and outdoors.
  • Mold spores are microscopic and float along in the air and may enter your home through windows, doors, or AC/heating systems or even hitch a ride indoors on your clothing or a pet.
  • Mold spores thrive on moisture. Mold spores can quickly grow into colonies when exposed to water. These colonies may produce allergens and irritants.
  • Before mold remediation can begin, any sources of water or moisture must be addressed. Otherwise, the mold may return.
  • Mold often produces a strong, musty odor and can lead you to possible mold problem areas.
  • Even higher-than-normal indoor humidity can support mold growth. Keep indoor humidity below 45 percent.

If your home or business has a mold problem, we can inspect and assess your property and use our specialized training, equipment, and expertise to remediate your mold infestation.

If You See Signs of Mold, Call Us Today – 972-602-1112